- Used
- Categories
- Machinery Metal
- Industrial machinery
- Machinery construction
- Recycling machinery
- Machinery power
- Mining machinery
- Textile machinery
- Workshop accessories
- Wood machinery
- Painting machinery
- Electrical machinery
- Agricultural machinery
- Logistics machinery
- Machinery cleaning
- Control systems
- Heavy machinery
- Plastic machinery
- Machinery work public
- Equipment shops
- Machinery Metal
LATHE FOR WOOD MACHINING - Special winches
Technical characteristics:
-Construido with structural steel carbon 120x60x4 and 40x40x4 soldiers, stabilized and machined.
-Finished painted following the usual procedure (orange color).
-Distance between points of 3400 m-m
-Turn diameter of 420 m-m
-Motor of 3hp of 220 v.
-Electronic control with frequency inverter and with speed adjustment potentiometer.
General description:
Machine specially designed for the manufacture of sticks of shepherd's jump (traditional practice of the Canary Islands).
With a system of adjustment of the angle of the piece to mechanise in all the length by means of the adjustment with springs that keep it always in load.
With rotating bezel to maintain the stability of the piece during machining. This lunette moves throughout the entire route.
Within the range determined by the diameter of turning (420 m-m) it is possible to machine different designs according to the type of piece to be turned.
History:
The design (for which he had friendly and professional help) and the dedication over a year for the construction of this lathe are born from the efforts of the craftsman Manzur Abdola Tabraue for persisting in the manufacture of clubs despite the physical impediments They were conditioning him in the last stage of his life.
Thus, the creation of this artifact is based on the profound respect and love of Manzur for the culture, craftsmanship and traditional Canarian arts, as well as for its desire to preserve the native customs and, especially, the Salto del Pastor.
We made the decision, as a family of Manzur, to honor their work and their time looking for continuity in the use of this lathe.
Our initial desire is that it can be used for the function for which it was designed, but we understand that it may be useful for other types of interests.
In the end, the versatility and quality of the lathe is at the height of its objective and what matters to us is that the material that sustained Manzur's dream continues to generate movement, creation and life.
- The machine was considered finished just over a week before the death of Manzur, so it is more than
It is evident that he still has a lot to turn ahead of.
- The price corresponds to the full investment involved in the construction of the machine.
- The location of the current machine is the island of Gran Canaria. The expenses in case of transfer will be charged to the person interested in the purchase.
-Construido with structural steel carbon 120x60x4 and 40x40x4 soldiers, stabilized and machined.
-Finished painted following the usual procedure (orange color).
-Distance between points of 3400 m-m
-Turn diameter of 420 m-m
-Motor of 3hp of 220 v.
-Electronic control with frequency inverter and with speed adjustment potentiometer.
General description:
Machine specially designed for the manufacture of sticks of shepherd's jump (traditional practice of the Canary Islands).
With a system of adjustment of the angle of the piece to mechanise in all the length by means of the adjustment with springs that keep it always in load.
With rotating bezel to maintain the stability of the piece during machining. This lunette moves throughout the entire route.
Within the range determined by the diameter of turning (420 m-m) it is possible to machine different designs according to the type of piece to be turned.
History:
The design (for which he had friendly and professional help) and the dedication over a year for the construction of this lathe are born from the efforts of the craftsman Manzur Abdola Tabraue for persisting in the manufacture of clubs despite the physical impediments They were conditioning him in the last stage of his life.
Thus, the creation of this artifact is based on the profound respect and love of Manzur for the culture, craftsmanship and traditional Canarian arts, as well as for its desire to preserve the native customs and, especially, the Salto del Pastor.
We made the decision, as a family of Manzur, to honor their work and their time looking for continuity in the use of this lathe.
Our initial desire is that it can be used for the function for which it was designed, but we understand that it may be useful for other types of interests.
In the end, the versatility and quality of the lathe is at the height of its objective and what matters to us is that the material that sustained Manzur's dream continues to generate movement, creation and life.
- The machine was considered finished just over a week before the death of Manzur, so it is more than
It is evident that he still has a lot to turn ahead of.
- The price corresponds to the full investment involved in the construction of the machine.
- The location of the current machine is the island of Gran Canaria. The expenses in case of transfer will be charged to the person interested in the purchase.
Machine specially designed to turn long pieces of wood and, especially, for the manufacture of sticks of Salto del pastor,
With a system of adjustment of the angle of the piece to mechanise in all the length by means of the adjustment with springs that keep it always in load.
With rotating bezel to maintain the stability of the piece during machining. This lunette moves throughout the entire route.
Within the range determined by the diameter of turning (420 m-m) it is possible to machine different designs according to the type of piece to be turned.
With a system of adjustment of the angle of the piece to mechanise in all the length by means of the adjustment with springs that keep it always in load.
With rotating bezel to maintain the stability of the piece during machining. This lunette moves throughout the entire route.
Within the range determined by the diameter of turning (420 m-m) it is possible to machine different designs according to the type of piece to be turned.
Occasional Seller
Machine specially designed to turn long pieces of wood and, especially, for the manufacture of sticks of Salto del pastor,
With a system of adjustment of the angle of the piece to mechanise in all the length by means of the adjustment with springs that keep it always in load.
With rotating bezel to maintain the stability of the piece during machining. This lunette moves throughout the entire route.
Within the range determined by the diameter of turning (420 m-m) it is possible to machine different designs according to the type of piece to be turned.
With a system of adjustment of the angle of the piece to mechanise in all the length by means of the adjustment with springs that keep it always in load.
With rotating bezel to maintain the stability of the piece during machining. This lunette moves throughout the entire route.
Within the range determined by the diameter of turning (420 m-m) it is possible to machine different designs according to the type of piece to be turned.